227
The Excess Burst Size for MEF type bandwidth profile. The allowed range is
from 0 through 100000 bytes..
Buttons:
Refresh- Refreshes the displayed table starting from the input fields.
|<<- Updates the table, starting with the first entry in the table.
<<- Updates the table, ending at the entry before the first entry currently
displayed.
>>- Updates the table, starting with the entry after the last entry currently
displayed.
>>|- Updates the table, ending at the last entry in the table.
Apply- Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.
2-24.4 EVCs
This page displays current EVC configurations. On this system, only Provider Bridge
based EVCs are supported.
Web Interface
To configure EVCs Control list Configuration in the web interface:
1. Click configuration, Ethernet Services and EVCs.
2. Specify EVC ID, VID, IVID, Learning, Inner Tag and Outer Tag.
3. Click Apply.
Figure 2-24.4: The EVCs
To Next Page
Loading...
