404
3-10.3 MVR SFM Information
The MVR SFM (Source-Filtered Multicast) Information Table also contains the SSM
(Source-Specific Multicast) information. This table is sorted first by VLAN ID, then by
group, and then by Port. Different source addresses belong to the same group are
treated as single entry.
Web Interface
To display the MVR SFM Information in the web interface:
1. Click Monitor, MVR, MVR SFM Information
2. If you want to auto-refresh the information then you need to evoke the
“Auto-refresh”.
3. To click the “Refresh” to refresh an entry of the MVR Groups Information.
4. Click “<< or >> “to move to previous or next entry.
Figure 3-10.3: The MVR SFM Information
Parameter description:
Navigating the MVR SFM Information Table
Each page shows up to 99 entries from the MVR SFM Information Table, default being
20, selected through the "entries per page" input field. When first visited, the web page
will show the first 20 entries from the beginning of the MVR SFM Information Table.
The "Start from VLAN", and "Group Address" input fields allow the user to select the
starting point in the MVR SFM Information Table. Clicking the button will update the
To Next Page
Loading...
