LevelOne IGP-1271 - Security; 2-5.1 Switch

34
from a DHCP message when transferring to DHCP client. It only works when DHCP
relay operation mode is enabled.
Disabled: Disable DHCP relay information mode operation.
 Relay Information Policy :
Indicates the DHCP relay information option policy. When DHCP relay information
mode operation is enabled, if the agent receives a DHCP message that already
contains relay agent information it will enforce the policy. The 'Replace' policy is
invalid when relay information mode is disabled. Possible policies are:
Replace: Replace the original relay information when a DHCP message that already
contains it is received.
Keep: Keep the original relay information when a DHCP message that already
contains it is received.
Drop: Drop the package when a DHCP message that already contains relay
information is received.
 Buttons
Apply – Click to save changes.
Reset - Click to undo any changes made locally and revert to previously saved
values.
2-5 Security
This section shows you to configure the Port Security settings of the Switch. You can
use the Port Security feature to restrict input to an interface by limiting and identifying
MAC addresses.
2-5.1 Switch
2-5.1.1 Users
This page provides an overview of the current users. Currently the only way to login as
another user on the web server is to close and reopen the browser