275
2-28 PTP
This page allows the user to configure and inspect the current PTP clock settings.
Web Interface
To configure the PTP in the web interface:
1. Click Configuration, UPnP
2. Scroll to select the mode to enable or disable
3. Specify the parameters in each blank field.
4. Click the save to save the setting
5. If you want to cancel the setting then you need to click the Reset button.
It will revert to previously saved values
Figure 2-28: The PTP
Parameter description:
PTP External Clock Configuration
One_PPS_Mode
This Selection box will allow you to select the One_pps_mode configuration.
To Next Page
Loading...
