407
3-11 IPMC
3-11.1 IGMP Snooping
3-11.1.1 Status
After you complete the IGMP Snooping configuration, then you could to let the switch
display the IGMP Snooping Status. The Section provides you to let switch to display
the IGMP Snooping detail status.
Web Interface
To display the IGMP Snooping status in the web interface:
1. Click Monitor, IGMP Snooping, Status
2. If you want to auto-refresh the information then you need to evoke the
“Auto-refresh”.
3. Click “Refresh” to refresh the IGMP Snooping Status.
4. Click “Clear “to clear the IGMP Snooping Status.
Figure 3-11.1.1: The IGMP Snooping Status.
To Next Page
Loading...
