LevelOne IGP-1271 - 2-25.5 Port Shaping

244
2-25.5 Port Shaping
This section provides an overview of QoS Egress Port Shapers for all switch ports.
Others the user could get all detail information ot the ports belong to the currently
selected stack unit, as reflected by the page header.
Web Interface
To display the QoS Port Shapers in the web interface:
1. Click Configuration, QoS, Port Shapers
2. Display the QoS Egress Port Shapers
Figure 2-25.5: The QoS Egress Port Shapers
Click the Port index to set the
QoS
Egress Port Shapers
If you select the scheduler
mode with wighted then
the screen will change as
the figure.