305
Shows if the link partner is EEE capable.
EEE Savings
Shows if the system is currently saving power due to EEE. When EEE is enabled, the
system will powered down if no frame has been received or transmitted in 5 uSec.
Actiphy Savings
Shows if the system is currently saving power due to ActiPhy.
PerfectReach Savings
Shows if the system is currently saving power due to PerfectReach.
3-3 Ports
The section describes to configure the Port detail parameters of the switch. Others you
could using the Port configure to enable or disable the Port of the switch. Monitor the
ports content or status in the function.
3-3.1 Traffic Overview
The section describes to the Port statistics information and provides overview of general
traffic statistics for all switch ports.
Web Interface
To Display the Port Statistics Overview in the web interface:
1. Click Monitor, Port, then Traffic Overview
2. If you want to auto-refresh then you need to evoke the “Auto-refresh”.
3. Click “ Refresh“ to refresh the port statistics or clear all information when you
click “ Clear”.
Figure 3-3.1: The Port Statistics Overview
To Next Page
Loading...
