294
Chapter 3. Monitor
This chapter describes all of the basic network statistics which includes the
Ports, Layer 2 network protocol (e.g. NAS, ACL, DHCP, AAA and RMON etc.)
and any setting of the Switch.
3-1 System
After you login, the switch shows you the system information. This page is default and
tells you the basic information of the system, including “Model Name”, “System
Description”, “Contact”, “Location”, “System Up Time”, “Firmware Version”, “Host Mac
Address”, “Device Port”. With this information, you will know the software version used,
MAC address, serial number, how many ports good and so on. This is helpful while
malfunctioning.
3-1.1 Information
The switch system information is provided here.
Web interface
To configure System Information in the web interface:
1. Click Monitor, System and Information.
2. Check the contact information for the system administrator as well as the name
and location of the switch. Also indicate the local time zone by configuring the
appropriate offset.
3. Click the “Refresh”
To Next Page
Loading...
