116
MIB Retrieval Support
Controls whether the MIB Retrieval Support is enabled for the switch port. On
enabling the MIB retrieval support, the DTE supports polling of various Link OAM
based MIB variables' contents.
Loopback Operation
If the Loopback support is enabled, enabling this field will start a loopback
operation for the port.
Buttons
Apply – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.
2-7.2 Event Settings
This page allows the user to inspect the current Link OAM Link Event configurations, and
change them as well.
Web Interface
To configure the Event Setting in the web interface:
1. Click Configuration, Link OAM and Event Settings.
2. Evoke Port members
3. Click the Apply to save the setting
Figure 2-7.2: The Event Settings
Parameter description:
Port :
To Next Page
Loading...
