LevelOne IGP-1271 - Link Oam; 2-7.1 Port Settings

114
The Timeout controls the period between BPDU transmissions. Fast will transmit
LACP packets each second, while Slow will wait for 30 seconds before sending a
LACP packet.
 Prio
The Prio controls the priority of the port. If the LACP partner wants to form a larger
group than is supported by this device then this parameter will control which ports
will be active and which ports will be in a backup role. Lower number means greater
priority.
 Buttons
Apply – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.
2-7 Link OAM
2-7.1 Port Settings
This page allows the user to inspect the current Link OAM port configurations, and
change them as well.
Web Interface
To configure the Port Setting in the web interface:
1. Click Configuration, Link OAM and Event Settings.
2. Evoke Port members
3. Click the Apply to save the setting
Figure 2-7.1: The Port Setting