476
4-4 Traceroute
This page allows you to issue ICMP, TCP, or UDP packets to diagnose network
connectivity issues.
Web Interface
To configure an ICMPv6 PING Configuration in the web interface:
1. Specify traceroute IP Address.
2. Specify traceroute Size.
3. Click Start.
Figure 4-4: The Traceroute
Parameter description:
Protocol :
The protocol(ICMP, UDP, TCP) packets to send.
IP Address :
The destination IP Address.
Wait Time :
Set the time (in seconds) to wait for a response to a probe (default 5.0 sec). Values
To Next Page
Loading...
