290
When the Link Option in Manual, you should Setting External Port and Your IGN/NAT's Port
Forward function by Manual.
When Link function working success, Mobile(s) can access this NAT by Internet.
Possible modes are:
Automatic: Link Option in Automatic.
Manual: Link Option in Manual.
Link State :
Report network information between Switch and Internet Gateway Device (IGN).
External Port :
When the Link Option in Manual, you should Setting External Port.
Internal Port :
Information about iSwitch Client's Internal Port.
Protocol :
Information about iSwitch Client's Protocol.
Destination IP :
Information about Client's Destination IP.
2-33.2 iPush Options
iPush options are configurd on this page. User can setup the events to trigger the
iPush and the severity in iPush Event Severity Configuration. The name and role of
each port also can be defined here.
iPush Event Severity Configuration: : Go to event severity configuration page.
Web Interface
To configure iPush Options in the web interface:
1. Click Configuration, Switch2go and iPush Options.
2. Set the parameters