289
Parameter description:
Management mode :
Indicates the Management mode operation. When the mode operation is enabled, the
message will send out to (or get from) the server. The protocol is based on TCP
communication and received on TCP port 443 and the server will send
acknowledgments/information back sender since TCP is a connection-oriented protocol.
Possible modes are:
Enabled: Enable Switch2go Management mode operation.
Disabled: Disable Switch2go Management mode operation.
Server Address :
Indicates the IPv4 host address of server. If the switch provide DNS feature, it also can be a
host name.
Server State :
Report network information between Switch and Server.
Link Option :
Indicates the Link Option operation.
When the Link Option in Automatic, enabling applications to access the services provided by
an UPnP "Internet Gateway Device (IGN)" present on the network.
To Next Page
Loading...
