202
2-21 Private VLANs
In a private VLAN, communication between ports in that private VLAN is not permitted.
A VLAN can be configured as a private VLAN.
2-21.1 Membership
The Private VLAN membership configurations for the switch can be monitored and
modified here. rivate VLANs can be added or deleted here. Port members of each
Private VLAN can be added or removed here.
Private VLANs are based on the source port mask, and there are no connections to
VLANs. This means that VLAN IDs and Private VLAN IDs can be identical.
A port must be a member of both a VLAN and a Private VLAN to be able to forward
packets. By default, all ports are VLAN unaware and members of VLAN 1 and Private
VLAN 1.
A VLAN unaware port can only be a member of one VLAN, but it can be a member
of multiple Private VLANs.
Web Interface
To configure Membership in the web interface:
1. Click Configuration, Private VLANs and Membership.
2. Evoke which port want to enable Port Members.
3. Click Apply.
Figure 2-21.1: The Membership
Parameter description:
To Next Page
Loading...
