LevelOne IGP-1271 - Switch2 Go; 2-33.1 Switch2 Go Setting

288
 Port
The switch port number of the port.
 Status
The current Rapid Ring status of the port.Buttons:
Apply – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.
2-33 Switch2go
2-33.1 Switch2go setting
Configure Switch2go management and link setting.
Web Interface
To configure Switch2go setting in the web interface:
1. Click Configuration, Switch2go and and Switch2go setting.
2. Set the parameters
3. Click Apply.
Figure 2-33.1: The Switch2go setting