494
5-5.3 Upload
The configuration upload function will be backuped and saved configuration from the
switch’s configuration into the running web browser PC.
It is possible to upload any of the files on the switch to the web browser. Select the
file and click Upload of running-config may take a little while to complete, as the file
must be prepared for upload.
Web Interface
To upload configuration in the web interface:
1. Chick Browser to select Maintenance/Configuration in you device.
2. Click upload Select.
Figure 5-5.3: Configuration upload
There are three system files:
1. running-config: A virtual file that represents the currently active configuration on the
switch. This file is volatile.
2. startup-config: The startup configuration for the switch, read at boot time.
3. default-config: A read-only file with vendor-specific configuration. This file is read
when the system is restored to default settings.
To Next Page
Loading...
