402
3-10.2 MVR Channels Groups
The section describes user could display the MVR Groups detail information on the
switch. Entries in the MVR Group Table are shown on this page. The MVR Group Table
is sorted first by VLAN ID, and then by group
Web Interface
To display the MVR Groups Information in the web interface:
1. Click Monitor, MVR, Groups Information
2. If you want to auto-refresh the information then you need to evoke the
“Auto-refresh”.
3. To click the “Refresh” to refresh an entry of the MVR Groups Information.
4. Click “<< or >> “to move to previous or next entry.
Figure 3-10.2: The MVR Groups Information
Parameter description:
Navigating the MVR Channels (Groups) Information Table
Each page shows up to 99 entries from the MVR Group table, default being 20,
selected through the "entries per page" input field. When first visited, the web page
will show the first 20 entries from the beginning of the MVR Channels (Groups)
Information Table.
To Next Page
Loading...
