214
VLAN ID :
Indicates the ID to which Group Name will be mapped. A valid VLAN ID ranges from
1-4095.
Port Members :
A row of check boxes for each port is displayed for each Group Name to VLAN ID
mapping. To include a port in a mapping, check the box. To remove or exclude the
port from the mapping, make sure the box is unchecked. By default, no ports are
members, and all boxes are unchecked.
Adding a New Group to VLAN mapping entry :
Click to add a new entry in mapping table. An empty row is added to the table, the
Group Name, VLAN ID and port members can be configured as needed. Legal
values for a VLAN ID are 1 through 4095. The button can be used to undo the
addition of new entry.
Buttons:
Apply – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.
Auto-refresh :
To evoke the auto-refresh icon then the device will refresh the information
automatically.
Upper right icon (Refresh):
You can click them for refresh the Protocol Group Mapping information by manual.
2-22.3 IP Subnet-based VLAN
The IP subnet-based VLAN entries can be configured here. This page allows for adding,
updating and deleting IP subnet-based VLAN entries and assigning the entries to
different ports. This page shows only static entries.
Web Interface
To Display IP subnet-based VLAN Membership to configured in the web interface:
To Next Page
Loading...
