225
values.
2-24.3 Bandwidth Profiles
This page displays current EVC ingress bandwidth profile configurations. These
policers may be used to limit the traffic received on UNI ports. The settings can also
be configured here.
Web Interface
To configure Bandwidth Profiles in the web interface:
1. Click configuration, Ethernet Services and Bandwidth Profiles.
2. Specify State, Type, Policer Mode and Rate Type.
3. Click Apply.
Figure 2-24.3: The Port Configuration
Parameter description:.
Start Policer ID
The start Policer ID for displaying the table entries. The allowed range is
from 1 through 256.
Number of Entries
To Next Page
Loading...
