LevelOne IGP-1271 - 2-9.4 CIST Ports

128
Parameter description:
 MSTI :
The bridge instance. The CIST is the default instance, which is always active.
 Priority :
Controls the bridge priority. Lower numeric values have better priority. The bridge
priority plus the MSTI instance number, concatenated with the 6-byte MAC address
of the switch forms a Bridge Identifier.
 Buttons
Apply – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.
2-9.4 CIST Ports
When you implement an Spanning Tree protocol on the switch that the bridge
instance. You need to configure the CIST Ports. The section describes it allows the user
to inspect the to inspect the current STP CIST port configurations, and possibly change
them as well.