LevelOne IGP-1271 - 2-10.2 Address Entry

135
Parameter description:
 Global Profile Mode
Enable/Disable the Global IPMC Profile.
System starts to do filtering based on profile settings only when the global profile
mode is enabled.
 Delete
Check to delete the entry.
The designated entry will be deleted during the next save.
 Profile Name
The name used for indexing the profile table.
Each entry has the unique name which is composed of at maximum 16 alphabetic and
numeric characters. At least one alphabet must be present.
 Profile Description
Additional description, which is composed of at maximum 64 alphabetic and numeric
characters, about the profile.
No blank or space characters are permitted as part of description. Use "_" or "-" to
separate the description sentence.
 Rule
When the profile is created, click the edit button to enter the rule setting page of the
designated profile. Summary about the designated profile will be shown by clicking
the view button. You can manage or inspect the rules of the designated profile by
using the following buttons:
: List the rules associated with the designated profile.
: Adjust the rules associated with the designated profile.
 Buttons
Add New IPMC Profile – Click to add new IPMC profile. Specify the name and
configure the new entry. Click "Save".
Apply – Click to save changes.
Reset – Click to undo any changes made locally and revert to previously saved values.
2-10.2 Address Entry
This page provides address range settings used in IPMC profile.
The address entry is used to specify the address range that will be associated with
IPMC Profile. It is allowed to create at maximum 128 address entries in the system.