LevelOne IGP-1271 - 3-12.2 LLDP-MED Neighbour

426
3-12.2 LLDP-MED Neighbour
This page provides a status overview of all LLDP-MED neighbours. The displayed table
contains a row for each port on which an LLDP neighbour is detected. This function
applies to VoIP devices which support LLDP-MED. The columns hold the following
information:
Web Interface
To show LLDP-MED neighbor:
1. Click Monitor, LLDP, LLDP-MED Neighbor.
2. Click Refresh for manual update web screen
3. Click Auto-refresh for auto-update web screen
Figure 3-12.2: The LLDP-MED Neighbours information
NOTE: If your network without any device supports LLDP-MED
then the table will show “No LLDP-MED neighbour information
found”.
Parameter description:
 Port :
The port on which the LLDP frame was received.
 Device Type :
LLDP-MED Devices are comprised of two primary Device Types: Network
Connectivity Devices and Endpoint Devices.
 LLDP-MED Network Connectivity Device Definition
LLDP-MED Network Connectivity Devices, as defined in TIA-1057, provide access to