LevelOne IGP-1271 - 2-5.2 Network

68
Indicates the notification of the event, the possible types are:
None: No SNMP log is created, no SNMP trap is sent.
Log: Create SNMP log entry when the event is triggered.
Snmp trap: Send SNMP trap when the event is triggered.
Log and trap: Create SNMP log entry and sent SNMP trap when the event is
triggered.
 Community
Specify the community when trap is sent, the string length is from 0 to 127, default
is "public".
 Event Last Time
Indicates the value of sysUpTime at the time this event entry last generated an
event.
2-5.2 Network
2-5.2.1 Limit Control
This section shows you to configure the Port Security settings of the Switch. You can
use the Port Security feature to restrict input to an interface by limiting and identifying
MAC addresses.
Web Interface
To configure a Configuration of Limit Control in the web interface:
1. Select “Enabled” in the Mode of System Configuration.
2. Checked Aging Enabled.
3. Set Aging Period (Default is 3600 seconds).
To configure a Port Configuration of Limit Control in the web interface:
1. Select “Enabled” in the Mode of Port Configuration.