LevelOne IGP-1271 - Page 76

69
2. Specify the maximum number of MAC addresses in the Limit of Port Configuration.
3. Set Action (Trap, Shutdown, Trap & Shutdown)
4. Click Apply.
Figure 2-5.2.1: The Port Security Limit Control Configuration
Parameter description:
System Configuration
 Mode :
Indicates if Limit Control is globally enabled or disabled on the switch. If globally
disabled, other modules may still use the underlying functionality, but limit checks
and corresponding actions are disabled.
 Aging Enabled :
If checked, secured MAC addresses are subject to aging as discussed under Aging