403
The "Start from VLAN", and "Group Address" input fields allow the user to select the
starting point in the MVR Channels (Groups) Information Table. Clicking the button will
update the displayed table starting from that or the closest next MVR Channels
(Groups) Information Table match. In addition, the two input fields will - upon a button
click - assume the value of the first displayed entry, allowing for continuous refresh
with the same start address.
The will use the last entry of the currently displayed table as a basis for the next lookup.
When the end is reached the text "No more entries" is shown in the displayed table.
Use the button to start over
MVR Channels (Groups) Information Table Columns
VLAN ID :
VLAN ID of the group.
Groups :
Group ID of the group displayed.
Port Members :
Ports under this group.
Buttons
Auto-refresh: Check this box to refresh the page automatically. Automatic refresh
occurs every 3 seconds.
Refresh: Click to refresh the page.
|<<: Updates the system log entries to the first available entry ID
>> : Updates the system log entry to the next available entry ID
To Next Page
Loading...
