293
These parameters are displayed on the SMTP Configuration page:
Mail Server :
Specify the IP Address of the server transferring your email.
Username :
Specify the username on the mail server.
Password :
Specify the password on the mail server.
Severity Level :
Indicates what kind of message will send to mail server. Possible modes are:
<0> Emergency: System is unusable.
<1> Alert: Action must be taken immediately.
<2> Critical: Critical conditions.
<3> Error: Error conditions.
<4> Warning: Warning conditions.
<5> Notice: Normal but significant conditions.
<6> Information: Information messages.
<7> Debug: Debug-level messages.
Sender :
To set the mail sender name.
Return-Path :
To set the mail return-path as sender mail address.
Email Address 1-6 :
Email address that would like to receive the alarm message.
Buttons:
Apply – Click to apply changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.
To Next Page
Loading...
