LevelOne IGP-1271 - Page 132

125
Parameter description:
Configuration Identification
 Configuration Name :
The name identifying the VLAN to MSTI mapping. Bridges must share the name and
revision (see below), as well as the VLAN-to-MSTI mapping configuration in order
to share spanning trees for MSTI's (Intra-region). The name is at most 32 characters.
 Configuration Revision :
The revision of the MSTI configuration named above. This must be an integer
between 0 and 65535.
 MSTI :
The bridge instance. The CIST is not available for explicit mapping, as it will receive
the VLANs not explicitly mapped.