132
Web Interface
To configure the Spanning Tree MSTI Port Configuration parameters in the web
interface:
1. Click Configuration, Spanning Tree, MSTI Ports
2. Scroll to select the MST1 or other MSTI Port
3. Click Get to set the detail parameters of the MSTI Ports.
4. Scroll to set all parameters of the MSTI Port configuration.
5. Click the save to save the setting
6. If you want to cancel the setting then you need to click the Reset button. It will
revert to previously saved values
Figure 2-9.5: The MSTI Port Configuration
Parameter description:
To Next Page
Loading...
