175
The PoE Mode represents the PoE operating mode for the port.
Disabled: PoE disabled for the port.
PoE : Enables PoE IEEE 802.3af (Class 4 PDs limited to 15.4W)
PoE+ : Enables PoE+ IEEE 802.3at (Class 4 PDs limited to 30W)
Priority :
The Priority represents the ports priority. There are three levels of power priority
named Low, High and Critical.
The priority is used in the case where the remote devices requires more power than
the power supply can deliver. In this case the port with the lowest priority will be
turn off starting from the port with the highest port number.
Maximum Power :
The Maximum Power value contains a numerical value that indicates the maximum
power in watts that can be delivered to a remote device.
The maximum allowed value is 30 W.
To Next Page
Loading...
