186
Direction
Down: This is a Down MEP - monitoring ingress OAM and traffic on 'Residence Port'.
Up: This is a Up MEP - monitoring egress OAM and traffic on 'Residence Port'.
Residence Port
The port where MEP is monitoring - see 'Direction'. For a EVC MEP the port must be a
port in the EVC. For a VLAN MEP the port must be a VLAN member.
Level
The MEG level of this MEP.
Flow Instance
The MEP is related to this flow - See 'Domain'. This is not relevant and not shown in case
of Port MEP.
Tagged VID
Port MEP: An outer C/S-tag (depending on VLAN Port Type) is added with this VID.
Entering '0' means no TAG added.
EVC MEP: This is not used.
VLAN MEP: This is not used.
EVC MIP: On Serval, this is the Subscriber VID that identify the subscriber flow in this EVC
where the MIP is active.
This MAC
The MAC of this MEP - can be used by other MEP when unicast is selected (Info only).
Alarm
There is an active alarm on the MEP. Buttons:
Apply – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.