LevelOne IGP-1271 - Page 195

188
Port: This will create a 1+1 EPS.
Port: This will create a 1:1 EPS.
 W Flow
The working flow for the EPS - See 'Domain'.
 P Flow
The protecting flow for the EPS - See 'Domain'.
 W SF MEP
The working Signal Fail reporting MEP.
 P SF MEP
The protecting Signal Fail reporting MEP.
 APS MEP
The APS PDU handling MEP.
 Alarm
There is an active alarm on the EPS.
 Buttons:
Apply – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.