219
Parameter description:
Mode :
Indicates the Voice VLAN mode operation. We must disable MSTP feature before
we enable Voice VLAN. It can avoid the conflict of ingress filtering. Possible modes
are:
Enabled: Enable Voice VLAN mode operation.
Disabled: Disable Voice VLAN mode operation.
VLAN ID :
Indicates the Voice VLAN ID. It should be a unique VLAN ID in the system and
cannot equal each port PVID. It is a conflict in configuration if the value equals
management VID, MVR VID, PVID etc. The allowed range is 1 to 4095.
Aging Time :
Indicates the Voice VLAN secure learning aging time. The allowed range is 10 to
10000000 seconds. It is used when security mode or auto detect mode is enabled.
In other cases, it will be based on hardware aging time. The actual aging time will be
situated between the [age_time; 2 * age_time] interval.
Traffic Class :
Indicates the Voice VLAN traffic class. All traffic on the Voice VLAN will apply this
class.
Port Mode :
Indicates the Voice VLAN port mode.
When the port mode isn't equal disabled, we must disable MSTP feature before we
enable Voice VLAN. It can avoid the conflict of ingress filtering.
Possible port modes are:
Disabled: Disjoin from Voice VLAN.
Auto: Enable auto detect mode. It detects whether there is VoIP phone attached to
the specific port and configures the Voice VLAN members automatically.
Forced: Force join to Voice VLAN.
Port Security :
To Next Page
Loading...
