LevelOne IGP-1271 - Page 269

262
Parameter description:
 QCE# :
Indicates the index of QCE.
 Port :
Indicates the list of ports configured with the QCE.
 DMAC :
Indicates the destination MAC address. Possible values are:
Any: Match any DMAC.
Unicast: Match unicast DMAC.
Multicast: Match multicast DMAC.
Broadcast: Match broadcast DMAC.
<MAC>: Match specific DMAC.
The default value is 'Any'.
 SMAC :
Match specific source MAC address or 'Any'.
If a port is configured to match on DMAC/DIP, this field indicates the DMAC.
 Tag Type :
Indicates tag type. Possible values are: