264
DSCP: If a frame matches the QCE then DSCP will be classified with the value
displayed under DSCP column.
Modification Buttons :
You can modify each QCE (QoS Control Entry) in the table using the following
buttons:
: Inserts a new QCE before the current row.
: Edits the QCE.
: Moves the QCE up the list.
: Moves the QCE down the list.
: Deletes the QCE.
: The lowest plus sign adds a new entry at the bottom of the QCE listings.
Port Members :
Check the checkbox button in case you what to make any port member of the QCL
entry. By default all ports will be checked
Key Parameters :
Key configuration are described as below:
Tag Value of Tag field can be 'Any', 'Untag' or 'Tag'
VID Valid value of VLAN ID can be any value in the range 1-4095 or 'Any'; user can
enter either a specific value or a range of VIDs
PCP Priority Code Point: Valid value PCP are specific (0, 1, 2, 3, 4, 5, 6, 7) or range
(0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'Any'
DEI Drop Eligible Indicator: Valid value of DEI can be any of values between 0, 1 or
'Any'
SMAC Source MAC address: 24 MS bits (OUI) or 'Any'
DMAC Type Destination MAC type: possible values are unicast (UC), multicast (MC),
broadcast (BC) or 'Any'
Frame Type Frame Type can have any of the following values
1. Any
To Next Page
Loading...
