286
Parameter description:
Port
Port number of the switch.
UDLD Mode
Configures the UDLD mode on a port. Valid values
are Disable, Normal and Aggressive. Default mode is Disable.
Disable
In disabled mode, UDLD functionality doesn't exists on port.
Normal
In normal mode, if the link state of the port was determined to be unidirectional, it
will not affect the port state.
Aggressive
In aggressive mode, unidirectional detected ports will get shutdown. To bring back
the ports up, need to disable UDLD on that port.
Message Interval
Configures the period of time between UDLD probe messages on ports that are in
the advertisement phase and are determined to be bidirectional. The range is from
7 to 90 seconds(Default value is 7 seconds)(Currently default time interval is
supported, due to lack of detailed information in RFC 5171).
Buttons:
To Next Page
Loading...
