301
Auto-refresh
To evoke the auto-refresh icon then the device will refresh the log automatically.
Level
level of the system log entry. The following level types are supported:
Information level of the system log.
Warning: Warning level of the system log.
Error: Error level of the system log. All: All levels.
ID
ID (>= 1) of the system log entry.
Time
It will display the log record by device time. The time of the system log entry.
Message
It will display the log detail message. The message of the system log entry.
Buttons
Auto-refresh: Check this box to refresh the page automatically. Automatic refresh
occurs every 3 seconds.
Refresh: Updates the system log entries, starting from the current entry ID.
Clear: Flushes the selected log entries.
|<<: Updates the system log entries, starting from the first available entry ID.
<< : Updates the system log entries, ending at the last entry currently displayed.
>> : Updates the system log entries, starting from the last entry currently displayed.
>>|: Updates the system log entries, ending at the last available entry ID