LevelOne IGP-1271 - Page 328

321
Displays the nominal bit rate of the transceiver.
 Vendor OUI
Displays the vendor IEEE company ID.
 Vendor Name
Displays the vendor name.
 Vendor P/N
Displays the vendor part number or product name.
 Vendor Revision
Displays the vendor¡¦s product revision.
 Vendor Serial Number
Displays the vendor serial number for the transceiver.
 Date Code
Displays the vendor's manufacturing date code.
 Temperature
Displays the internally measured transceiver temperature. Temperature accuracy is
vendor specific but must be better than 3 degrees Celsius over specified operating
temperature and voltage.
 Vcc
Displays the internally measured transceiver supply voltage. Accuracy is vendor
specific but must be better than 3 percent of the manufacturer's nominal value over
specified operating temperature and voltage. Note that in some transceivers,
transmitter supply voltage and receiver supply voltage are isolated. In that case,
only one supply is monitored. Refer to the device specification for more detail.
 Mon1 (Bias)
Displays the measured TX bias current in uA. Accuracy is vendor specific but must
be better than 10 percent of the manufacturer's nominal value over specified
operating temperature and voltage.
 Mon2 (TX PWR)