328
1. Click Monitor, Link OAM and Event Status.
2. To display the Event Status.
Figure 3-4.1: The Event Status
Parameter description:
Port
The switch port number.
Sequence Number
This two-octet field indicates the total number of events occurred at the remote
end.
Frame Error Event Timestamp
This two-octet field indicates the time reference when the event was generated, in
terms of 100 ms intervals.
Frame error event window
This two-octet field indicates the duration of the period in terms of 100 ms intervals.
1) The default value is one second. 2) The lower bound is one second. 3) The upper
bound is one minute.
Frame error event threshold
To Next Page
Loading...
