447
displayed table starting from that or the closest next MAC Table match. In addition,
the two input fields will - upon a “Refresh” button click - assume the value of the first
displayed entry, allowing for continuous refresh with the same start address.
The >> will use the last entry of the currently displayed VLAN/MAC address pairs as a
basis for the next lookup. When the end is reached the text "No more entries" is shown
in the displayed table. Use the l<< button to start over.
MAC Table Columns
Switch (stack only)
The stack unit where the entry is learned.
Type :
Indicates whether the entry is a static or a dynamic entry.
VLAN :
The VLAN ID of the entry.
MAC address :
The MAC address of the entry.
Port Members :
The ports that are members of the entry.
Buttons
Auto-refresh: Check this box to refresh the page automatically. Automatic refresh
occurs every 3 seconds.
Clear: Clears the counters for the selected port.
Refresh: Click to refresh the page.
|<<: Updates the system log entries to the first available entry ID
>> : Updates the system log entry to the next available entry ID
To Next Page
Loading...
