460
3-18.2.2 Group to VLAN
This page shows you the configured Group Name to a VLAN for the switch.
Web Interface
To Display Group to VLAN configuration in the web interface:
1. Click Monitor, VCL, Group to VLAN.
2. Checked “Auto-refresh”.
3. Click “Refresh” to refresh the port detailed statistics.
Figure 3-17.2.2: The MAC-based VLAN Membership Status for User Static
Parameter description:
Group Name :
A valid Group Name is a string at the most 16 characters which consists of a
combination of alphabets (a-z or A-Z) and integers(0-9), no special character is
allowed. Whichever Group name you try map to a VLAN must be present in
Protocol to Group mapping table and must not be pre-used by any other existing
mapping entry on this page.
VLAN ID :
Indicates the ID to which Group Name will be mapped. A valid VLAN ID ranges from
1-4095.
Port Members :
A row of check boxes for each port is displayed for each Group Name to VLAN ID
mapping. To include a port in a mapping, check the box. To remove or exclude the
To Next Page
Loading...
