LevelOne IGP-1271 - Page 51

44
 Mode :
Indicates the access management mode operation. Possible modes are:
Enabled: Enable access management mode operation.
Disabled: Disable access management mode operation.
 VLAN ID :
Indicates the VLAN ID for the access management entry.
 Delete :
Check to delete the entry. It will be deleted during the next save.
 Start IP address :
Indicates the start IP address for the access management entry.
 End IP address :
Indicates the end IP address for the access management entry.
 HTTP/HTTPS :
Indicates that the host can access the switch from HTTP/HTTPS interface if the host
IP address matches the IP address range provided in the entry.
 SNMP :
Indicates that the host can access the switch from SNMP interface if the host IP
address matches the IP address range provided in the entry.
 TELNET/SSH :
Indicates that the host can access the switch from TELNET/SSH interface if the host
IP address matches the IP address range provided in the entry.
 Buttons:
Add New Entry – Click to add a new access management entry.
Apply – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.