57
2-5.1.7.6 Views
The function is used to configure SNMPv3 view. The Entry index keys are OID Subtree
and View Name. T
o create a new view ac
count, please check
<Add new view> button,
and enter the view information then check <Save>. Max Group Number: 28.
Configure SNMPv3 view table on this page. The entry index keys are View Name and
OID Subtree.
Web Interface
To display the configure SNMP views in the web interface:
1. Click SNMP, Views.
2. Click Add new View.
3. Specify the SNMP View parameters.
4. Click Apply.
5. If you want to modify or clear the setting then click Reset.
Figure 2-5.1.7.6: The SNMP Views Configuration
Parameter description:
To Next Page
Loading...
