LSIS SV-IS7 - Monitoring Faults; Faults During Inverter Operation

Using the Keypad
105
Using the
Keypad
5.8 Monitoring Faults
5.8.1 Faults during Inverter Operation
• If a fault trip occurs during inverter operation, the
inverter enters Trip mode automatically and
displays the type of fault trip that has occurred.
• Press the [Down] key to view the information on the
inverter at the time of the fault, including the output
frequency, current, and operating status.
• When the inverter is reset and the fault trip is
released, the keypad display returns to the screen
that was displayed before the fault trip occurred.