Do not allow the ambient temperature to exceed the allowable range while operating the inverter.
3.2
Selecting and Preparing a Site for Installation
When selecting an installation location, consider the following requirements:
• The inverter must be installed on a wall that can support the inverter’s weight.
• The location must be free from vibration. Vibrations can adversely affect the operation of
the inverter.
• The inverter can become very hot during operation. Install the inverter on a surface that is
fire resistant or flame retardant with sufficient clearance around the inverter to allow for air
circulation. The illustrations below detail the required installation clearances.
To Next Page
Loading...
