REPAIR INSTRUCTIONS, PART 2
Page 425
4. Disconnect the oil supply line from the fitting
in the turbocharger center housing.
5. Remove the two capscrews securing the oil
drain tube at the bottom of the turbocharger
center housing (Figure 515).
6. If the oil drain tube is to be removed,
disconnect the EGR oil return line from the
drain tube and remove the two capscrews
from the drain tube flange at the cylinder
block. Remove the drain tube.
515
Figure 515 — Turbocharger Oil Drain
The turbocharger is heavy, weighing
approximately 76 lbs. DO NOT attempt to remove
or install the turbocharger without the help of an
assistant or the use of a suitable lifting device.
7. Loosen and remove the four turbocharger
mounting nuts and remove the turbocharger
from the engine.
516
Figure 516 — Turbocharger Mounting
1. Turbocharger
2. EGR Valve Oil Return
Line
3. EGR Valve
4. Turbocharger Oil Drain
Tube
1. Retaining Nuts (4)
2. Turbocharger Assembly
3. Exhaust Manifold
(Center Section)
5-111.bk Page 425 Monday, July 10, 2006 2:26 PM
To Next Page
Loading...
