Maeda MC285C-3 - SEARCHER HOOK INSPECTION AND MAINTENANCE

M A E D A Mini-Crawler Crane Section 5 – SEARCHER HOOK INSPECTION AND MAINTENANCE
1/2019 MC285C-3 5-73
SEARCHER HOOK
INSPECTION AND
MAINTENANCE
Legal Inspection
If a periodic safety inspection is required by the
laws and regulations of your country, perform that
inspection in addition to the inspection items listed
below.
1. Verify that all safety devices are operating
properly.
2. Check the hoist accessories, including the
hook block, for problems or damage.
3. Check the structural parts of the machine,
including the frame and boom, for cracks,
deformation and damage.
4. Check for loose or missing mounting bolts
and joints.
5. Verify that the boom operates properly by
stopping, extending, retracting, raising,
lowering and slewing the boom.
6. Contact us or our sales service agency to
request inspection and repair service as
needed.
Consumables
Parts for mounting searcher hook are
consumables. Replace them at periodic
inspection or before they reach abrasion limits.
Replace consumables regularly, which will
produce economical use of this machine. Always
replace with a Maeda genuine item. Check parts
catalogue for correct part number for parts
request.
List of Consumables
Item
Replacement Cycle
Searcher hook fix
bolt
M12x35L strength
10.9 (4pcs)
★Every 6 months or
when damage, crack, or
squash is found
Searcher hook fix nut
M12x1grade (4pcs)
★Every 6 months or
when damage, crack,
or squash is found
Searcher hook fix
washer
M12x3.2t (high
tension)(4pcs)
★Every 6 months or
when damage, crack,
or squash is found
Searcher hook fix
bolt
M8x25L strength
10.9 (4pcs)
★Every 6 months or
when damage, crack, or
squash is found
★ Items include a halt period. Contact us or our
sales service agency for part replacement
information.