Maeda MC285C-3 - Horn Switch Operation; Boom Lift Bypass Switch Operations

Section 4 – REMOTE CONTROL SYSTEM OPERATION Mini-Crawler Crane M A E D A
4-104 1/2019 MC285C-3
Press the Emergency Engine Stop (EMO)/
Remote Control System Power OFF Switch when
turning off the power to the transmitter, or in case
of an abnormality in crane operations.
The power of the transmitter turns OFF and the
engine stops.
Fig. 4-279
To cancel the emergency stop, turn the
Emergency Engine Stop (EMO)/Remote Control
System Power OFF Switch to the right.
The switch returns to the original position.
Fig. 4-280
Horn Switch Operation
The horn keeps blowing while this switch is
pressed and held.
Fig. 4-281
Boom Lift Bypass Switch
Operations
If you cannot avoid lifting the boom while stopped
automatically, you can lift the boom by pressing
the Boom Lift Bypass Switch.
Fig. 4-282
WARNING! Operate this switch only if the
boom has stopped automatically after
entering the overload area while being
operated. Never use this switch in normal
situations to lift loads off the ground.
Serious accidents such as machine damage
or toppling may occur if you use this switch to
lift loads off the ground.