Maeda MC285C-3 - Check Emergency Engine Stop Switch (EMO); Check Engine Exhaust Gas Color, Noise and Vibration

Section 5 – INSPECTION Mini-Crawler Crane M A E D A
5-30 1/2019 MC285C-3
Check Emergency Engine Stop Switch
(EMO)
Push the Emergency Engine Stop Switch (EMO)
and ensure that the engine stops.
If the engine does not stop, there may be an error
with the switch or a wire disconnected. Contact us
or our sales service agency.
NOTICE: When restarting the engine after
emergency stop, be sure to turn the Emergency
Engine Stop Switch (EMO) to the OFF position
before starting the engine. The engine does not
start when it is “ON”.
Fig. 5-45
Check Engine Exhaust Gas Color, Noise
and Vibration
1. Idle the engine with no load. Do not move the
acceleration lever for approximately 5
minutes.
Fig. 5-46
2. Verify the engine exhaust gas color is either
transparent or slightly blue. Check for
abnormal noises and vibrations. Repair as
necessary before continuing operation.