M A E D A Mini-Crawler Crane Section 5 –
LEGAL INSPECTION
1/2019 MC285C-3 5-9
LEGAL INSPECTION
1. Verify all safety devices are operating
properly.
2. Check the hoist accessories, including the
hook block, for problems or damage.
3. Check the winch wire rope end and wire clip
for damage.
4. Replace the wire rope immediately if
damaged.
5. Check the hydraulic hoses for oil leaks and
damage on the outer surfaces. Replace if any
surface damage is detected.
6. Check the structural parts of the machine,
including the frame and boom, for cracks,
deformation and damage.
7. Check for loose or missing mounting bolts
and joints.
8. Verify the boom operates properly by
stopping, extending, retracting, raising,
lowering and slewing the boom.
Contact us or our sales service agency to request
inspection and repair service as needed.
CONSUMABLES
Consumables such as filter elements and wire
ropes are to be replaced at designated periodic
maintenance intervals or prior to reaching their
wear limit. Proper replacement of consumables
ensures increased machine performance and
efficiency.
Always use Maeda genuine parts for part
replacement. See the Maeda genuine parts book
for part numbers when ordering parts.
After initial 50 hrs
and then every
500 hrs
Hydraulic oil return filter
After initial 50 hrs
and then every
500 hrs
Boom retracting wire rope
* Items include a halt period. The remaining time
until replacement of consumables displayed on
the monitor is based on operating time. Replace
items before the indicated replacement time if
they appear depleted or worn. Contact us or our
sales service agency for part replacement
information.
To Next Page
Loading...
