M A E D A Mini-Crawler Crane Section 4 – REMOTE CONTROL SYSTEM FEATURES
1/2019 MC285C-3 4-83
Transmitter Accessories
• Waist belt
Waist belt to be worn when using transmitter to
prevent accidental dropping of the unit during
operation.
Fig. 4-225
• Battery charger
This is a charger to charge the battery for the
transmitter.
Fig. 4-226
Functions of Remote Control
System
• The acceleration dial and operation levers
control the crane operation speed continuously
from stand-by, up to maximum speed.
• In addition to handling the crane by transmitter,
manual operation can be performed on the
machine side, depending on the type of
operation required. When the power of the
remote control system is turned on, manual
operation cannot be performed.
• ID data necessary for the operation of the
transmitter is built in this remote control system.
If communications are not established when the
power is turned ON or if they are interrupted
(poor reception or beyond reaching distance)
during operation, the “forced zero position”
function is activated to return to the state in
which no operation lever is pressed, to avoid
miss-operation or erroneous activation.
• This remote control system detects an unused
frequency automatically.
To Next Page
Loading...
